FREEFLY MOVI M10
Introducing a handheld 3-axis digital stabilized camera gimbal, so advanced, it redefines the possibilities for camera movement. The M10 is rated to carry up to 10lbs (4.5) kilos. Cameras from as small as the Black Magic Pocket Cinema right up to a Red Scarlet or Epic with follow focus work seamlessly with the system.
Additional MōVI M10 Features:
Majestic Mode (Pan/Tilt)
Allows for a single operator to intuitively control the pointing of the gimbal by moving the handles without compromising the stabilization of the image. This allows for very low profile single operator setup and accurate framing in tight situations.
The system will automatically adjust the camera angle to maintain a consistent frame. This is useful in situations where the camera will be moving so fast that no human operator could possibly keep up. The MōVI can accurately adjust the frame hundreds of times per second to keep the subject in frame as the camera translates.
Live Wireless Tuning & Graphing
The MōVI features a real-time bluetooth connection to the gimbal, which outputs all pertinent performance data and allows for live adjustment of any of the gimbal parameters.
Drift Free Horizon
The proprietary control algorithms developed for the MōVI utilize a very high accuracy GPS. This GPS allows for acceleration correction when the gimbal is used outdoors or has a GPS signal. This feature is useful when used on cars and helicopters where sustained extreme accelerational forces can cause non-GPS aided systems to drift.
Capturing on-camera audio is no problem with the MōVI, as the system is virtually silent. Because the entire motor / drive system was designed in-house, we were able to reduce the noise frequency signature of the gimbal to a virtually inaudible level.
The system has the ability to record the exact camera position, height, pan, tilt and roll angle to assist the VFX team in post-production.
The Teradek Bolt HD-SDI Transmitter and Receiver Set is a unicast latency-free wireless system that transmits uncompressed video using WSDI Pro, which provides a wireless range of up to 300′. The system can coexist with other wireless equipment by dynamically adjusting the frequency bands used in real time. For optimal performance in challenging RF environments, Bolt can utilize Dynamic Frequency Selection (DFS) to avoid interference.
Bolt transmitter is housed in a milled aluminum chassis with six 1/4″-20 mounting holes. The receiver is enclosed in a durable ABS plastic shell. The transmitter requires approximately 4W of power, while the receiver consumes only 6W. To power these units for long periods of time, Bolt ships with a LEMO to P-tap cable that can be used to connect with external power sources such as V-mount or AB Gold-mount batteries.
- Super 16mm Sized Image Sensor
- Active Micro Four Thirds Lens Mount
- 13 Stops of Dynamic Range
- Records Full HD 1920×1080 CinemaDNG RAW
- Apple ProRes 422 (HQ) at 220 Mbps
- Portable Design (5″ Long and 12.5 oz)
- 3.5″ LCD Display with 800×480 Resolution
- Uses SDXC and SDHC Memory Cards
- EN-EL20 Compatible Rechargeable Battery
- HDMI, LANC, 3.5mm Audio Input and Output